manualshive.com logo in svg

ABB PST, Installation And Maintenance Manual

Share
Download
ABB PST Installation And Maintenance Manual Download Page 74

74

               Low Voltage Products & Systems

 AC 1006.9 - 5/03

                 ABB Inc. • 888-385-1221 • www.abb-control.com

Chapter 7 - Settings and configuration

Kick Start

Activate the 

Kick Start function by entering this menu. Press Store

to save the selection.

Kick Level

Set the required level of the Kick Start. Press 

Store to save the

data.

This menu will only be visible if Kick Start is activated.

Kick Time

Set the required time for the kick start. Press 

Store to save the

data.

This menu will only be visible if Kick Start is activated.

Start Range

The ramp time for start can be set between 1 and 30 seconds as
default. If required, the range can be extended up to 120 seconds
by entering this menu. Press 

Store to save the data.

Stop Range

The ramp time for stop can be set between 0 and 30 seconds as
default. If required, the range can be extended up to 120 seconds
by entering this menu. Press 

Store to save the data.

The configuration of the parameters in the Start/Stop group is now
completed. It is possible to return to top level by pressing Back
three times. To configure the protections, proceed to that menu.

Summary of Contents for PST





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands