ABB PST, Installation And Maintenance Manual, Page: 53 / 180

Low Voltage Products & Systems 53
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Application Setting
Select Back
Setting Ie 99.5A
Change Back
Functional Settings
Select Back
Start/Stop
Select Back
Setting Ie 100A
Change Back
SETTINGS
Select Back
Chapter 6 - Human-Machine Interface (HMI)
The functionality of the keypad is illustrated by the following example:
Changing the rated motor current (Setting I
e
).
1. You will find the setting as well as a short explanation and the path to it in
Chapter 10 “ Functions”.
Path in menu:
Menu/SETTINGS/Functional Settings/
Start/Stop /Setting Ie
2. The top level of the softstarter start menu looks as in Figure 3. Press the left
selection key to enter the menu. The display now appears as in Figure 4.
3. Press the left selection key to select SETTINGS. The display appears as in
Figure 5.
4. Press the lower navigation key until the display appears as in Figure 6.
5. Press the left selection key to select Functional settings. Press the left
selection key to select Start/Stop, Figure 7.
6. Press the left selection key to Change the Setting Ie, Figure 8.
The display now appears as in Figure 9.
7. Use the navigation keys to set the rated current. If you want to quit, you
select Cancel, using the right selection key. Otherwise, you store the new
setting by selecting Store with the left selection key. The display should now
appear as in Figure 10.
8. Press the right selection key four times to return to top level.
U = 0% I = 0.0A
Menu
Setting Ie 100A
Store Cancel
Figure 3: Top level
Figure 4: SETTINGS menu
Figure 5: Application Setting
menu
Figure 6: Functional settings
menu
Figure 7: Start/stop menu
Figure 8: Setting Ie menu
Figure 9: Setting Ie menu,
changing menu
Figure 10: Setting Ie menu,
changing setting