ABB PST, Installation And Maintenance Manual

Page: 137 / 180

Low Voltage Products & Systems 137
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 10 - Functions
10:36 Bypass fault, type of operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/BP Fault Op
This parameter makes it possible to select between three different
actions when the protection is activated. It is active only if the by-
pass monitor protection is selected.
10:37 High current warning
Path in menu:
Menu/SETTINGS/Functional Settings/
Warnings/Warn I=High
If the function is selected, a warning signal will be given provided
that the current during full voltage is higher than the set value. The
measurement starts 30 seconds after full voltage is reached
Stop– M
Stop– A
The motor stops and an automatic reset
is performed when the fault disappears.
Th
i b f l
The motor stops and a manual reset is
required before restart.
Parameter
text Default
value Setting
range
Description
BP Fault Op Stop-M
Stop-M,
Stop-A
Type of
operation for
bypass fault
Parameter
text Default
value Setting
range
Description
Warn I =
High
No Yes, No
High current
warning