Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201
52 Chapter 6
6.2 Navigating the menu
The menu is navigated by the keypad. The Navigation keys are used to scroll up
or down. The Select key is used to select a setting and save. The Exit key is used
to cancel without selecting or saving a setting, and to go to a higher level of the
menu, as illustrated in figure 6.9.
1. Turn on the backlight by pressing any key.
2. On the Information level use the Navigation keys for scrolling the different
operational information.
3. Press the Select key to Enter the Settings level. See
A
in figure 6.10. A cur
-
sor is marking the accessible parameter, in this case Rated Current Ie.
4. Press Select key again to enable editing of the parameter Rated Current. See
B
in figure 6.10. A flashing value on the middle row indicates that the param
-
eter is available for scrolling and for selection.
5. Increase or decrease the value by pressing Navigation key repeatedly. Hold-
ing the key down will speed up the scrolling. See
C
in figure 6.10.
6. When the rated current of the motor is reached, press the Select key again to
save. See
D
in figure 6.10.
7. It is possible to select and adjust the other parameters by following the same
procedure.
8. At any point, press Exit to cancel a setting, and return to the information level.
Exit
Select
Reset
1SFC132291F0001
Figure 6.9: Press Exit key to cancel and to go to
a higher level of the menu.
