ABB Pluto Series, Integration Manual

Page: 6 / 41

6
2TLC172011M0205_B
2.1 Examples
•
Want read data from only Pluto 0 .
Use
DIP switch configuration .
Easy configuration for read data from one or several Pluto unit with station number 0 – 15.
•
Want read data from Pluto 0 and 14 .
Use
DIP switch configuration .
Easy configuration for read data from one or several Pluto unit with station number 0 – 15.
•
Want read data from only Pluto 24 .
Use
ABB robotic system configuration .
As soon data from a Pluto above station number 15 then use ABB robotic system
configuration .
•
Want read data from Pluto 16 and 24 .
Use
ABB robotic system configuration .
As soon data from a Pluto above station number 15 then use ABB robotic system
configuration .
•
Want read data from Pluto 5 and 24 .
Use
ABB robotic system configuration .
As soon data from a Pluto above station number 15 then use ABB robotic system
configuration .
•
Want read data from Pluto 0 and also send data to Pluto 0 .
Use
ABB robotic system configuration .
As soon send data to Pluto then use ABB robotic system configuration .
•
If want to read data from Pluto 0 – 24 .
Use
ABB robotic system configuration .
There are a need to read data from more then 16 Pluto then use ABB robotic system
configuration and also use two Pluto gateway .
Configure one Pluto gateway to read data from Pluto 0-11.
Configure the other Pluto gateway to read data from Pluto 12-24.
•
If want to read data from Pluto 0 – 24 and also send data down to the Pluto system.
Use
ABB robotic system configuration .
There are a need to read data from more then 16 Pluto then use ABB robotic system
configuration and also use two Pluto gateway .
Configure one gateway to read for example data from Pluto 0-11.
Configure the other gateway to read for example data from Pluto 12-24.
Configure
only one of the gateways to handle data sent to the Pluto system.