ABB NE840, User Manual

Page: 23 / 34

Section 2 Interface specifications
Getting Started
This product runs ABB Network Equipment Operating System (NEOS) which
provides several management tools that can be used for configuration of the unit.
NeCo - is a Network configuration management tool (NCM) made for
commissioning and maintenance of components in a network.
Web - Configuration of the unit using the web browser.
CLI - Configuration of the unit via the Command Line Interface.
If the computer is located in the same subnet as the switch you can easily use a
web browser to configure the unit. Within the web you can configure most of the
available functions.
For advanced network settings and more diagnostic information, please use the CLI.
Detailed documentation is available in the chapter
The Command Line
Management Tool in the NEOS User Manual .
Factory default:
– IP address: 172.16.5.245
– Netmask: 255.255.252.0
– Gateway: Disabled
Consult your network administrator to know more on subnet.
Configuration
Configure the unit via Web browser. The unit can easily be configured through a
Web browser. Open the link http://172.16.5.245 in your web browser, and you will
be prompted with a Login screen, where the default settings for Username and
Password are:
– Username: admin
– Password: CS4dmin
3BSE080639 23