ABB MICRO-0.25-I-OUTD-US-208/240, Product Manual

Page: 42 / 55

- 42 -
012C6
6 - Maintenance
S
torage and dismantling
If the equipment is not used immediately or is stored for long periods, check that it is packaged correctly and
contact customer service for storage instructions. The equipment must be stored in well-ventilated indoor areas
in a noncorrosive environment. Restarting after a long period requires the removal of oxidation and dust that
may have settled inside the equipment if not suitably protected.
ABB CANNOT be held responsible for disposal of the equipment, displays, cables, batteries, etc. The customer
must dispose of these substances, which are potentially harmful to the environment, in accordance with the
regulations in force in the country of installation.
If the equipment is dismantled, follow the regulations in force in the country of destination and avoid causing
any kind of pollution upon disposal. Use dumps suitable for disposal of the various types of materials listed
below.
&20321(17 0$7(5,$/2)&216758&7,21
Frame, brackets, supports Arc-welded steel FE37
Casing or covers ABS, plastic
Paint and RAL
*DVNHWVDQGVHDOV 5XEEHU7HÀRQ9LWRQ
Electrical cables Copper / Rubber
Conduits Polyethylene / Nylon
Back-up battery Nickel / Lead/ Lithium