01
1C5
5 - Troubleshooting
If the measured insulation resistance is less than 1Kohm the inverter does not connect to the grid due to a low
insulation of photovoltaic module respect to ground.
The insulation resistance is affected by the environmental conditions the photovoltaic module is in (E.g.: pho-
tovoltaic module wet from dump or rain); therefore, the measurement must be made immediately after the
anomaly.
M
aking a service call
Call technical support at 877-261-1374. The following information is necessary to initiate a call. The model
number, serial number, and week of production can be found on the INFORMATION menu of the CDD display
and on the product label:
Model number
Serial number
:HHNRISURGXFWLRQ
State of LED:
Status of light(s)
6WHDG\RUÀDVKLQJ
Error message or code
Identify the System structure:
,QIRUPDWLRQRQWKH39¿HOG
Brand and model of PV panels
Provide a description of the conditions:
Can the fault be reproduced? If so, how?
Is the fault cyclical in nature? If so, how often?
:DVWKHIDXOWDSSDUHQWDWWKHWLPHRILQVWDOODWLRQ"
If so, has it worsened?
Describe the atmospheric conditions at the time
the fault appears/appeared.
Summary of Contents for MICRO-0.25-I-OUTD-US-208/240
