To a Network
Section 4 Connections
AA003700-01 rev. G. 2.0
18
To a Network
In this setup, both the PC and the instrument will obtain their LAN configuration
from the control DHCP server.
When first turned
ON
, your spectrometer will attempt to obtain automatically its
LAN configuration from the DHCP server.
To insure your PC Ethernet interface uses the DHCP server, perform the following
procedure:
Figure 4- 1. Connection via a Network
To ensure the DHCP server is properly detected, perform a power
OFF/ON
cycle
after connecting properly the Ethernet cable (i.e. Network LED must be
ON
).