Removing the Source Module
Section 7 Module Replacement
32
AA003700-01 rev. G. 2.0
STEP 2
Remove with a 2.5 mm Hex driver the 4 screws holding the front panel in
place.
STEP 3
Slide down and remove the front panel from the spectrometer.
STEP 4
Unscrew with a 2.5 mm Hex driver the bracket holding the Source Electronic
Board.
Figure 7- 3. Front panel captive screws
Do not discard the four screws: they will be required to reinstall the front panel.
Figure 7- 4. Source module: Source control board and source