2
2
CONFIGURING THE TRANSMITTER
The Transmitter is delivered set up either with your chosen
units, or set with our standard default values.
If you need to change the transmitter configuration for any
reason, this may be done by connecting a terminal device e.g.
Personal Computer, Electronic Organiser etc., to the
transmitter via the 9-way D-Type connector, found by sliding
the movable section of the transmitter cover in the direction of
the cable glands.
Special software is not required for configuring the transmitter;
any communication program will suffice.
Connect the programming terminal to the transmitter (See
APPENDIX A
for details of connection and setup of data
terminals etc. to the transmitter).
2.1
Getting Started
With connections made and the power switched onto the transmitter and terminal, proceed as shown below:
PRESS
Apple Macintosh
return
Enter
or
Personal Computer
Return
Enter
or
Psion Series 3
Enter
EXE
Psion Organiser II
Press until display shows first item on main menu
i.e.
'Read 1>'
Read 1>
Local Terminal Connections
