ABB M4M 20 User Manual Download Page 39

Page: 39 / 68

M4M 20

NETWORK ANALYZER USER MANUAL

Date/Time menu

During the first commissioning, it is highly recommended to configure the date and time on the network

analyzer (please refer to chapter “7.3.Date and time”).

Brightness menu

In this menu it is possible to modify the display brightness during normal operation conditions.

→

Unit

→

Display Brightness

100

Brightness

The default value is

100%

but it can differ from

10%

100%

The lifetime of the graphical display depends on its brightness and stand-by time. It is highly recommended to

limit the brightness level of the display in order to ensure a longer lifetime of the device.

Energy saving menu

In this menu it is possible to define the stand-by time and the stand-by brightness of the display in order

to limit the device power consumption when not in operation conditions.

→

Unit

→

Energy saving

Energy saving

Stand-by time

Stand-by brightness

Menu

Description

Stand-by time

Set up the time after that the brightness decrease. The

default value is 3

minutes

but it can differ from 1 to 60 minutes.

Stand-by brightness

Set up the level of brightness when the device is in stand-by. The

default

value is 40%

but it can differ from

100%

The lifetime of the graphical display depends on the brightness of the display. It is highly recommended to limit

the brightness level of the display in order to ensure a longer lifetime of the device.

Summary of Contents for M4M 20





































































Search results

Summary of Contents for M4M 20

Reviews:

Related manuals for M4M 20

Brands by name

Popular brands

ABB M4M 20, User Manual

Search results

Summary of Contents for M4M 20

Reviews:

Related manuals for M4M 20

Brands by name

Popular brands