ABB M4M 20 User Manual Download Page 36

Page: 36 / 68

M4M 20

NETWORK ANALYZER USER MANUAL

8.Configuration

In order to change any configuration of the device, it is mandatory to enter the password. The password

is valid as soon as the user remains in the Configuration section and for max. 10 minutes. After quitting

the Configuration section, it is needed to enter again the password.

If the padlock icon is closed, it is needed to enter the password in order to modify any configuration.

If the padlock icon is open, it is possible to modify any configuration without entering any password.

→

Installation
I/O
Alarms

Unit

Configuration

Press

key in order to return to homepage.

If the user exits from the Configuration section, the device configuration is protected again and it is needed to

re-enter the password.

8.1.Unit

Unit

Language
Reset
Device info

Modify Password

Menu

Description

Modify Password

Change the existing password.

Language

Change the language of the display.

Reset

Reset options for the meter.

Device info

Visualization of info related to the meter.

Date/Time

Change date and time on the device.

Brightness

Change the brightness of the display.

Energy Saving

Set energy saving mode for the display.

Audit log

Visualization of audit log and system log.

Summary of Contents for M4M 20





































































Search results

Summary of Contents for M4M 20

Reviews:

Related manuals for M4M 20

Brands by name

Popular brands

ABB M4M 20, User Manual

Search results

Summary of Contents for M4M 20

Reviews:

Related manuals for M4M 20

Brands by name

Popular brands