USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
114
Software Setup
1.
If applicable, in the parameter window of the
User Interface Control Bar, verify that
the optional MIU and WVISS accessories are not enabled. (Figure 107)
a. Disable the
Multi-Port Inlet Unit (MIU) if your analyzer is configured with this
optional accessory. To disable the MIU:
i.
Click Setup on the
User Interface Control Bar. (Figure 107)
Figure 107: Setup Button on the User Interface Control Bar
ii.
Click on the MIU tab at the top of the
Setup screen. (Figure 108)
iii.
Uncheck the checkbox at the bottom of the screen to disable the
MIU. (Figure 108)
iv.
Click Save Changes. (Figure 108)
v.
Click Close to exit the
Setup menu. (Figure 108)
Figure 108: Control Menu for the (Optional) Multi-Port Inlet Unit (MIU)
