ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 9 - Configuring the ABB Controller in RobotStudio | 19
d. In the Ethernet Properties
Networking
tab, find and double-click
Internet Protocol Version 4 (TCP/IPv4)
.
e. In the IPv4 Properties pop-up
General
tab, select
Use the following IP address
. Oet the IP address to
192.168.125.3
and set the Oubnet mask to
255.255.255.0
.
Note:
You may use a different value for the last digit of the IP address as long as it is between 2-255 and
doesn't conflict with other devices.
