ABB IM300-I, Operational Manual

Page: 45 / 109

IM300 Intelligent Power Monitoring Instrument
43
Fig. 3-3-22 Rates setting page.
Fig 3-3-24 Setting the base value
of total reactive energy
S
creen 23
：
Period rates setting 1
This page is used to set 00:00 ~ 06:00 of the period
rates. Top of the screen displays "ET-1" displayed, it
indicates this page to set the period rates 1, as shown in
fig. 3-3-22.
Each digit represents a step time (0.5 hours), the
display time period after activation, each number ranging
from 1 to 4, the representative rates in the following table:
Rate Type Code Explanation
1
Sharp,
Rates
2 Peak Rates
3
Shoulder
Rates
4 Off-peak Rates
S
creen 24
：
Period rates setting 2
This page is used to set 06:00 ~ 12:00 of the period rates. Top of the screen
displays "ET-2" words, similar methods of operation and the
display screen and the fourteenth.
S
creen 25
：
Period rates setting 3
This page is used to set 12:00 ~ 18:00 of the period rates.
Top of the screen displays "ET-3" words, similar methods of
operation and the display screen and the fourteenth.
S
creen 26
：
Period rates setting 4
This page is used to set the 18: 00 hours fee rates: 00 to 24.
Top of the screen displays "ET-4" words, similar methods of
operation and the display screen and the fourteenth.
S
creen 27
：
Setting the base value of total active energy
This page is used to setting the base value of total active
Fig 3-3-23 Setting the base
value of total active energy