ABB IM300-I, Operational Manual

Page: 44 / 109

IM300 Intelligent Power Monitoring Instrument
42
Fig 3-3-21 Password protection
settings page
represent 8 kinds of alarm related relays, as the following table:
Alarm association type code Explanation
①
Low power factor alarm associated relay
②
Over frequency alarm associated relay
③
Low frequency alarm associated relay
④
Over voltage alarm associated relay
⑤
Low voltage alarm associated relay
⑥
Over ground current alarm associated
relay
⑦
Zero-current alarm associated relay
⑧
Over current alarm associated relay
Alarm associated relays range from 0 to 2, 0 stands for no relays; 1 stands
for relays 1; 2 stands for relays 2.
Note: A relay can not be associated with multiple alarms at the same time.
Relay associated alarm, no longer subject to local and remote control.
S
creen 21
：
System time settings
This page is used to set the system time. The
upper display shows the word "TIME", indicates
the page to the system time setup page, as shown in
fig. 3-3-20.
As shown, showing at 16:19 on December 10
2008.
。
S
creen 22
：
Password protection settings
This page is used to set the system password
protection. Top of the screen displays the words "button",
expressed this page to protect your password settings
page, as shown in fig. 3-3-21.
Password has been set will be displayed on the screen,
the password range 0000 to 9999.
Note: The parameter settings and local operations
with this password.