KNX Technical Reference Manual
ABB-i-Bus
®
-KNX Millenium
Description of applications /
objects
KNX Technical Reference Manual | 1473-1-7819
— 34 —
Note
The following parameters are available only when parameter "Control type heating" is set on
"FanCoil".
Additional parameters for "Control
function = Heating"
Settings
Comments
send automatic switch-off
•
deactivated
•
activated
–
Manual operation of fan stage
•
Automatic On / Off
•
Manual On/Off
–
manual switching for frost
•
deactivated
•
activated
–
Number of fan stages
•
3 steps
•
5 steps
–
Evaluation stage status
•
deactivated
•
activated
–
Position output
•
only manuel
•
manual and auto
–
Format of the stage output
•
0 ... 5
•
0 ... 255
•
1-bit m of n
•
1-bit 1 of n
–
Control value output for fan stage 1 heating
(0 - 255)
0 … 255
–
Control value output for fan stage 2 heating
(0 - 255)
0 … 255
–
Control value output for fan stage 3 heating
(0 - 255)
0 … 255
–
Control value output for fan stage 4 heating
(0 - 255)
0 … 255
Only available when parameter "Number of
fan stages" is set on "5 steps".
Control value output for fan stage 5 heating
(0 - 255)
0 … 255
Jump-back active, if fan for heating off
•
deactivated
•
activated
–
Fan stage limit heating for ECO mode
•
deactivated
•
activated
–
max. fan stage heating for ECO mode
0 … 5
Only available when parameter "Fan stage
limit heating for ECO mode" is set on
"activated".
Timeout for fan heating (min)
1 … 360
–
