KNX Technical Reference Manual
ABB-i-Bus
®
-KNX Millenium
Operation
KNX Technical Reference Manual | 1473-1-7819
— 23 —
8.7
Setting the fan speed level (fan coil) or the operating status
To adjust the fan speed levels or the operating status, carry out the following steps:
1. Press the "Fan speed levels" button (1).
2. Turn the rotary control element until the desired fan
speed level or the desired operating status is displayed.
3. Press the button "Fan speed levels" or wait until the set
time expires.
The adjustment is stored.
Fig. 13:
Device in fan speed level setting
If button "Fan speed levels" (1) is actuated, the currently set fan speed level or the corresponding operating status
appears in the display.
Automatic ventilation
Ventilation off/standby
Stage 1
Stage 2 ... 4
Stage 5
Note
The function of the stages is adjustable via parameters.
When "Fan coil" is not activated via parameters, this button is inactive.
