ABB i-bus KNX IPR/S 3.5.1, Product Manual

Page: 41 / 44

ABB i-bus ® KNX
Planning and application
IPR/S 3.5.1 | 2CDC502099D0211 Rev. A 41
4.2 The i-bus
®
Tool
The ABB i-bus ® Tool is required in order to set certain functions of the ABB IP devices.
It simplifies commissioning on the IP side.
Go to the start page of the i-bus ® Tool, click
Connect
and then click
IP devices
in the window that then
appears.
Ribbon: Switching between Discovery, Firmware Update and Unicast
Click the corresponding button to select
Discovery
or
Unicast
mode.
4.2.1 Discovery
Select
Discovery
mode in the ribbon area. This function serves to find and display ABB IP devices in the
network. Not all information is displayed when the IP Router is operated in KNX Secure mode.
Note
The functions are described in the i-bus
®
Tool online help.