ABB i-bus
®
KNX
Device technology
18 2CDC502099D0211 Rev. A | IPR/S 3.5.1
2.6
Operating controls
There are no operating controls on the IP Router Secure.
2.7
Display elements
Three indicator LEDs are located on the front of the IPR/S:
ON
LAN/LINK
Telegram
ON
•
The LED lights for a few seconds after connection of the supply voltage.
•
After the supply voltage is connected, the LED initially lights up continuously. After approx. 40
seconds, the LED starts flashing until the startup process is complete and the LED lights up
continuously again. Depending on the size of the filter table, this can take 5 to 60 seconds.
LAN/LINK
•
The LED lights up when the supply voltage is present and the Router is connected to an Ethernet
network.
•
The LED flashes when the device detects activity on the network, e.g. when data is exchanged.
Telegram
•
The LED lights up when the Router is connected to a TP network and the startup process is complete
(see “On” LED).
•
The LED flashes when the device detects activity on the KNX subline TP1 (twisted pair 1), e.g. when
data is exchanged.
Summary of Contents for i-bus KNX IPR/S 3.5.1
