Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2020 . All rights reserved.
HZTL2464_EN
Rev.E
March 2020
u
Remove the cover from the oil connection.
u
Fit flange (42044) with screws (42054) and new gasket (42045).
u
Attach one lifting gear each to the two fins of the bearing casing
provided for this purpose.
u
Remove supports (90450) and carefully insert cartridge group.
u
Uniformly tighten the screws (61059) together with the Verbus Ripp®
washers (61058).
CAUTION
If there is no or insufficient clearance between the rotor turbine blades
and the turbine diffuser, the blades and the turbine diffuser (casing)
can be damaged.
u
Check that the blades do not rub on the turbine diffuser by rotating
the rotor.
u
Remove the lifting gear.
u
Fit O-ring (42012).
u
Screw in the speed sensor (86505) together with the O-ring (86506)
and plug in the cable connector (86515).
Page
88
/
108
