Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.3 Removing and fitting filter silencer
or air suction branch
© Copyright 2020 . All rights reserved.
HZTL2464_EN
Rev.E
March 2020
u
Pass lifting gear through lugs on back.
u
Unscrew nuts (72027) and remove them together with washers
(72018).
u
Remove filter silencer and set it down to one side.
Installing the filter silen-
cer
u
Install filter silencer in reverse order.
Removing the air suction
branch
u
Disconnect all air lines in accordance with the engine builder’s instruc-
tions.
u
Dismantle the insulation where necessary.
u
Pass a lifting gear around the air suction branch. It is permissible to
pass the lifting gear through holes possibly provided in the ribs to im-
prove stability.
u
Unscrew the nuts (72027) and remove them together with the wash-
ers (72018).
u
Remove the air suction branch and set it down to one side.
Installing the air suction
branch
u
Fit the air suction branch in reverse order.
Page
78
/
108
