Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2020 . All rights reserved.
HZTL2464_EN
Rev.E
March 2020
u
Measure and note the axial clearance (
A
) (see the section on axial
clearance).
CAUTION
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
u
Have components assessed and, if necessary, replaced by an ABB
Turbocharging Service Station.
u
Connect oil lines and all air lines in accordance with engine builder’s
instructions.
Version with compressor wheel cooling system
u
Fit the air supply line. (Also see the chapter Preliminary remarks / Lay-
out and functioning.)
u
Fit the filter silencer or air suction branch.
u
Fit the insulation.
Page
91
/
108
