![background image](http://html1.mh-extra.com/html/abb/ht562633/ht562633_operation-manual_3553684106.webp)
Operation Manual / TPS44-F.. - TPS61-F..
Disassembly and assembly
8
Disassembling and assembling
turbocharger
8.3
Page 104
Apr
il 20
15
H
ZT
L24
12_
EN
R
ev
is
ion E
NOTICE
If two turbochargers are mounted on an engine, one with a left-hand
and one with a right-hand oil inlet, a pin can be fitted in the bracket as a
precaution against incorrect positioning. This pin (B) locates in a
correspponing groove in the foot of the bearing casing.
Fasten the cartridge group using fastening strips (51002), Verbus
Ripp® washers (51003) and nuts (51007) (also see the chapter
entitled Table of tightening torques).
Fasten the bearing casing (42001) using the fixing screws (C).
Tighten the fixing screws (C) to the torques listed in the following table.
**) For the assembly of the turbocharger on the engine support, the
threads of the screws and screw heads must be lightly oiled (assumed
coefficient of friction µ = 0.12 for the tightening torque).
Product
Hole in the bearing
casing
[mm]
Fixing screws C [mm]
Tightening
torques [Nm] **)
TPS44
Ø 17
M16
230
TPS48
Ø 17
M16
230
TPS52
Ø 21
M20
455
TPS57
Ø 21
M20
455
TPS61
Ø 25
M24
780
If provided
© Copyright 2015 ABB. All rights reserved.