Commissioning
Product manual 9AKK107680A3585
│
28
7.5.1 Actuator
settings
Actuator settings
Fig. 15: Actuator settings
[1] Changing the name
[2] Deleting the channel
[3] Switching of the actuator via the button.
Dimming the actuator via the
−
/+ buttons
[4] Display of device identification (channel name or DALI addressing)
[5] Setting the minimum brightness in % via the -/+ buttons
[6] Setting the maximum switch-on brightness during the day in % via the -/+buttons
[7] Setting the maximum switch-on brightness during the night in % via the -/+ buttons
[8] Setting the switch-off delay in seconds
–
The -/+ buttons can be used to specify, for example, how long the light remains switched on after
the actuator has deactivated the load.
[9] Setting the activation mode
–
The parameter specifies whether the lamp switches on with the previously set brightness or
always with maximum brightness.