Note
Action
xx1800001336
Remove the exhaust pipe covers by removing
the screws securing them and the fixing plate.
CAUTION
Always properly support the fixing plate while
removing the screws. The fixing plate, togeth-
er with the longer reinforcement supports and
upper cable chain cover installed on it, may
drop a little distance after screws are re-
moved. Prevent damages or injuries due to
sudden dropping.
5
xx1800001337
Lifting the Feather Duster V2 to the robot
Note
Action
M8, DIN580 (2 pcs)
xx1800001333
Fit the lifting screws to the steel structure
frame.
CAUTION
The lifting eye nuts must be fitted to the pos-
itions shown in the figure to balance the
Feather Duster V2 while lifting.
1
Continues on next page
Product manual - Feather Duster V2
61
3HAX010000210 Revision: A
© Copyright 2018 ABB. All rights reserved.
3 Installation and commissioning
3.3.3 Installing the Feather Duster V2
Continued
Summary of Contents for Feather Duster V2
