ABB eVD4, Installation And Service Instructions Manual

Page: 23 / 72

21 21
Name Function
Escape
– Abandon the configuration mode without saving the values
– Cancel certain actions
– Adjust the display contrast in combination with the buttons or
– Change the language in combination with
– Start the test on the display in combination with
– Cancel a character when editing a string in combination with
– Insert a space when editing a string in combination with
Confirm
– Insert parameters in setting mode
– Confirm a new configured value
Up
Down
– Move up and down inside the menu
– Change the value of a figure when configuring a new value of a parameter
Left – Move left and right in the menu
Right – Change the figure being configured
Key
– Activate the Logging-in procedure, when the user is not authenticated
– Logging-out
Name Function
Menu
– Access the main menu directly during display of another menu
– Display the default screen of the main menu
R/L
Change the RBF615 control mode (remote or local)
– When the R LED is on, remote control is enabled and local control is disabled
– When the LED L is on, local control is enabled and remote control is disabled
– When no LED is on, both the controls are enabled
Cancel
– Activates the Clear/Reset screen
– Cancel indications and LEDs. When the Clear button is kept pressed, the first three seconds cause cancellation of the
indications, the following three seconds cause cancellation of the alarm LED. It requires a user with appropriate rights
Alarm pages – Allows scrolling of the various pages giving indications about the alarm LEDs
SLD – Activates the single-line diagram on the left-hand side of the display
5.3.7.14. Navigation
The arrow buttons are used for browsing. To scroll through the information presented in the menus, simply press the various
arrow buttons or keep them pressed.
5.3.7.15 Controls