ABB eVD4, Installation And Service Instructions Manual

Page: 22 / 72

20 20
2
1
3
15
11 14 13 12 10 9
4
5
6
7
8
Local Human Machine Interface
1 Opening
2 Closing
3 Function/application keys
4 LED page key
5 Delete
6 Menu
7 Single Line diagram
8 Local/Remote
9 Confirm
10 Password
11 Right
12 Up
13 Down
14 Left
15 Escape
When the local control mode has been configured, it is
possible to open and close the circuit-breaker with the control
button.
Name Function
Closing
Closes the eVD4
Opening
Opens the eVD4
5.3.7.11. LHMI (Local Human Machine Interface)
The LHMI (to be installed in the low voltage compartment)
allows configuration, monitoring and control of the RBX615.
The LHMI of the lED contains the following parts:
– Display
– Pushbuttons
– LED indicators
– Communication port
– USB port (reserved for Service)
– Housing for SD memory (reserved for future applications)
– Wireless adapter (reserved for future applications)
5.3.7.12. LCD Display
The local HMI locale (LHMI) includes a graphic display which
supports two character sizes according to the language
selected. The number of characters and lines displayed
depends on the size of the character.
5.3.7.13. Keyboard
The LHMI keyboard includes a set of buttons allowing the
operator to browse the various different menus so as to
display the measurements and alarms, and configure the
parameters. By means of the buttons, it is also possible to
give an opening or closing command to the eVD4, reset the
alarm indications and switch between the remote or local
control modes.