ABB DPU2000R, Manual

Page: 54 / 66

Section 5
1MRS240173-IB B
4x Registers
48 REF615R
DPU2000R Modbus Point List Mitigation Manual
Table 21: Mitigation of Modbus mapping for operation records
Different from decoding the operation number to find out event type as in DPR2000R,
REF615R reads the Modbus addresses associated with the event.
In one case, for example, the operation record has the following readings as shown in
Table 22.
Table 22: One example of Modbus event record value
User needs to check "Feeder Protection and Control REF615R Modbus Point List
Manual", document ID: 1MRS240052-IB to find out 10513 is mapped to IEC61850 path
of "CTRL.CBCSWI1.PosOpn.stVal" and its description is "52-1 Apparatus open
position", and understands value of 1 means "breaker open" as status value is set as 1.
By default, some Modbus registers do not generate event upon value changes. To make
them generate events, user can use PCM600 / CMT tool to enable event from "rising edge"
or "both edge" of the signal's status change. On the other hand, user can disable generate
default event from PCM6000 / CMT by simply checking off the event enable bit as shown
in Figure 6.
DPU2000R
register
addr.
DPU 2000R description Scale
REF615R
register
addr.
Scale Comments on REF615R Modbus points mapping
N/A 41536 Number of Events to Read per polling, read max.10 events at
the same time, not available in DPU2000R
41537 Data Control 1=First record;
2=Next record; 3=Oldest
Unreported record
1 41537 1 Data Control 1=First record; 2=Next record; 3=Oldest
Unreported record
41538 Year 1 41538 1 Year
41539 Month 1 41539 1 Month
41540 Day 1 41540 1 Day
41541 Hours 1 41541 1 Hours
41542 Minutes 1 41542 1 Minutes
41543 Seconds 1 41543 1 Seconds
41544 Hundredths of Seconds 1 41544 1 Hundredths of seconds
41545 Message # 1 41545 1 Sequence number after device powers up, it does not count fault
records saved before power up.
41546 Value 1 41546 1 Value (high word)
41547 Operation Number 1 41547 1 Value (low word)
N/A 41548 1 Area of the Register on which the event happened (0 = coil; 1=
input, 4 = 4x)
N/A 41549 1 Register address on which the event happened
Event records addresses values meaning
41546 0 Higher word value is 0
41547 1 Lower word value is 1
41548 1 Register area is 1, it is a 1x register
41549 513 Register address is 513