DCS800-EP Installation and Start-Up Manual
23
Control circuit connections
Parameter settings for I/O
Digital Inputs
NOTE: Setting “On / Off” will command the drive to close the contactor and enable the SCRs
to fire at a neutral setting. When “Start / Stop” is set, the motor will accelerate to the
reference speed.
Analog Inputs
Input
Function
Parameter
Setting
Notes
1
Unused
10.20
NOT USED
2
Fan Acknowledge
10.06
DI2
Change to “not used” if
optional blower motor
starter is not selected.
3
Unused
10.21
NOT USED
4
Unused
10.08
NOT USED
5
E-Stop
10.09
DI5
6
Reset
10.03
DI6
7
On / Off
10.15
DI7
8
Start / Stop
10.16
DI8
Input
Function
Parameter
Setting
Notes
AI1
Speed Reference
11.03
13.01
13.02
13.03
Dependent on
type of reference
input
See 5.03 for actual AI1
value
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
