Page 9
© 2021 ABB. All rights reserved.
CP:S6000_External Distribution_IG
Rev. 1.3
2.
Product Specification
CPS6000 is a
-
48V modular power system designed for 19
-
inch (483mm) or 23
-
inch (584mm)
mounting frames. These systems include 1 or 2 rectifier shelves and 1 or 2 distribution panels.
Rectifier shelves have either 4 slots or 6 slots providing up to 200A or 300A of DC power per shelf. AC
input options include AC cords or terminal blocks. The AC cord option is 10 gage cords with a L6
-
30P
plug each feeding two rectifier slots. Terminal block options are located either on the back of the
rectifier shelf or in a front accessible ac box as shown in the figure below.
The initial distribution panel includes the Pulsar controller mounted on the door and either 20 or 26
selectable distribution positions that can be configured as either battery inputs or load outputs.
Systems may be equipped with Low Voltage Battery Disconnect (LVBD), Low Voltage Load Disconnect
(LVLD) or no LVD. The supplemental distribution panel has 20 or 26 additional load positions.
Distribution panels are
7”
(4U) high, rectifier shelves and the AC box are
3.5”
(2U) high. The system
depth is
14”.
The rear terminal block option adds an additional 3 inches of depth.
Figure 1: System shown with doors open
