22
3ADR010470, 2, en_US
Activation of System Settings in System Mode:
Normal operation
If PB610 runtime is not running: Press “System Setting” button on
the CP600 2nd generation screen to enter in System Settings in
User Mode.
Select “Restart”
→
“Config OS” to reboot in System Mode.
If PB610 runtime is running: recall context menu and select “System
Settings”. To recall the context menu click and hold any unused area
of the touchscreen for a few seconds.
Default hold time is 2 seconds to enter in System Settings in User
Mode.
Select “Restart”
→
“Config OS” to reboot in System Mode.
Recovery operation
If panel is not responsive, use the so-called “tap-tap” procedure.
This procedure consists in tapping the surface of the touchscreen
during the device power-up phase. Tapping frequency must be high.
You have to start tapping the touchscreen as soon as power has
been applied to the device. When the sequence has been
recognized, the system shows the message: “TAP-TAP DETECTED”.
At this point release touch to boot in User Mode without running
PB610 runtime or press and hold few seconds (selecting so
“RESTART: CONFIG OS”) to boot in System Mode.
System Settings includes options for basic settings of the device.
Language
Configure language used for System Settings menu only.
System
Show information about platform, status and timers (e.g. System
on time, backlight on time).
Logs
Enable persistent log for BSP and allows to export it.
Date & Time
Change the device date and time, including time zone and
NTP Server
Network
Configure IP Address of Ethernet interface and the other network
settings like DNS, Gateway, DHCP, Hostname, routing and bridging.
Services
Enable/disable services. Example of services are: Open SSH server,
Cloud services, SNMP and logging.
Management
Update of BSP components (Main OS, Config OS, Boot loader,
XLoader), check for partitions consistence, update of splash screen,
information about usage and size of partitions. The update of Main
OS is available only in System Mode, the update of Config OS is only
in User Mode.
Display
Adjust brightness, configure automatic backlight turnoff and select
CP600 2nd generation orientation (90°, 180°, 270° and 360°).
Restart
Restart the device. “Main OS” option restarts as per default in User
Mode, “Config OS” option restart panel directly into System Set-
tings in System Mode.
Authentication
Configure password for administrator (“admin”) and for the stand-
ard user (“user”). Administrator has full access to System Settings
(updates of BSP and other system components).
Standard user has some limitations.
