CONTROL PANELS CP600 2ND GENER ATION
CP600 2nd generation, 2, en_US
7
4
Standards and approvals
The products have been designed for use in an industrial environment in compliance with the
2014/30/EU EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4
EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-29
EN60945
The installation of these devices into the residential, commercial and light-industrial environ-
ments is allowed only in the case that special in measures are taken in order to ensure con-
formity to EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances
(RoHS) Directive 2011/65/EU
In compliance with the above regulations the products are CE marked.
NOTE
If the mounting surface is not plane and robust enough, the degree IP69K
is not guaranteed.
A special mounting flange is included to provide the necessary support.
4.1
Product identification
The product may be identified through a plate attached to the rear cover. You will have to
know the type of unit you are using for correct usage of the information contained in the
guide.
An example of this plate is shown in the figure below:
Note: the CP6407 label is used as an example for CP600 2nd generation Series.
NOTE
The CP6407 label is used as an example for CP600 2nd generation Series.