ABB CoreSense User Manual Download Page 97

Page: 97 / 122

IEC 61850 (CoreSense only)

E93

PIXIT for File Transfer Model

Description

Value/Clarification

Ft1

What is structure of files and directories
Where are the COMtRaDE files stored
are comtrade files zipped and what files are included in each zip file

File transfer not supported.

Ft2

1,2

Directory names are separated from the file name by

File transfer not supported.

Ft3

the maximum file name size including path (recommended 64 chars)

File transfer not supported.

Ft4

1,2

are directory/file name case sensitive

File transfer not supported.

Ft5

1,2

Maximum file size for SetFile

File transfer not supported.

Ft6

Is the requested file path included in the MMS fileDirectory respond
file name

File transfer not supported.

Ft7

Is the wild char supported MMS fileDirectory request

File transfer not supported.

Ft8

1,2

Is it allowed that 2 clients get a file at the same time

File transfer not supported.

PIXIT for Service Tracking Model

Description

Value/Clarification

tr1

Which aCSI services are tracked by LtRK.Gentrk

Not applicable.

Summary of Contents for CoreSense



























































































































Search results

Summary of Contents for CoreSense

Reviews:

Brands by name

Popular brands

ABB CoreSense, User Manual

Search results

Summary of Contents for CoreSense

Reviews:

Brands by name

Popular brands