ABB COM600 series, User'S & Technical Manual, Page: 37 / 60

for example "Phase Grp 1", "Phase Grp 2" and "Phase Grp 3". One of the groups to be
used with the Base value Sel phase setting must be selected.
Recorded Data 4.5.
General
All the information required later for fault analysis is recorded when the recordingfunction
of SCEFRFLO is triggered. The triggering can be either internal or external.
Table 4.5-1 Recorded data of the SCEFRFLO
Description Parameter name
Record data of bank 1 for trigger time stamp 1 Recording time
Record data of bank 1 for fault loop 1 FAULT_LOOP
Record data of bank 1 for fault resistance 1 RF
Record data of bank 1 for fault loop resistance 1 RFLOOP
Record data of bank 1 for fault loop reactance 1 XFLOOP
Record data of bank 1 for fault distance 1 FLT_DISTANCE
Record data of bank 1 for Unsupported time 1 UNSUPP_TIME
Record data of bank 1 for Fault phase 1 FLT_PHASE
Record data of bank 1 for Fault type 1 FLT_TYPE
Record data of bank 1 for Validity of the calcu-
lation 1 VALIDITY_CALC
Record data of bank 1 for fault distance 1 FLT_DIST
Record data of bank 1 for Validity 1 VALIDITY
Record data of bank 1 for Breaks 1 Breaks
Record data of bank 1 for the CB open or
Application time 1 CB_OPEN_OR_APP_TIME
Record data of bank 1 for the source logic node 1 SOURCE_LN
Record data of bank 1 for the IED name 1 IED_NAME
Record data of bank 1 for the fault location
ready time stamps 1 FLOC_READY_TIMESTAMP
Application 4.6.
The main objective of line protection and monitoring terminals is fast, selective and
reliable operation for faults on a protected line section. Besides this, information on the
distance to fault is very important for those involved in operation and maintenance.
37
COM600 series 5.1 1MRS758734
Substation Analytics Technical Manual