manualshive.com logo in svg

ABB COM600 series, Data Historian Operator'S Manual

Share
Download
ABB COM600 series Data Historian Operator'S Manual Download Page 12

Introduction

2.

Overview of COM600

2.1.

COM600 provides gateway functions for mapping signals between protection and control
IEDs in industrial or utility substations and higher-level systems. It further includes an
optional WebHMI that provides data and information from the substation to the users.

COM600 gathers data from protection and control IEDs and from process devices using
different communication protocols. The supported protocols can be combined freely in
one station computer, limited only by the number of hardware interfaces and the license.
COM600 uses web technology to display data to different users in a professional and
user-friendly manner. The web technology is further used to transfer information to a
network control centre (NCC) or distributed control system (DCS).

COM600 benefits from the potential of the IEC 61850 standard by using the IEC 61850-
6 substation configuration language (SCL) and IEC 61850 -7 communications modeling
regardless of protocol used. As the IEC 61850 data modeling is used for all communic-
ation protocols the gateway cross-reference is done in the same way regardless of the
protocol, for example IEC 61850-8-1 or DNP3.

COM600 can be used for efficient substation visualization, monitoring and control with
the optional WebHMI. Measured values from process devices are displayed on the
WebHMI. Single-line diagrams can be used to view any available measured values from
the process devices.

Microsoft Internet Explorer or Google Chrome (with the
ClickOnce extension) is required for displaying data historian
information using the WebHMI.

12

1MRS756739

COM600 series, Version 5.0

Data Historian Operator's Manual

Summary of Contents for COM600 series













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands