Busch-Wächter
®
Operation
| 1473-1-7864
— 8 —
Pos: 32 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960458_15.docx @ 103424 @ 2 @ 1
6.2
Mounting
Pos: 33 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Montage/alle Geräte/Montage - UP-Dosen - DIN 49073-1 oder geeignetes Aufputzgehaeuse - Ohne Docvariable @ 20\mod_1325766034453_15.docx @ 136593 @ @ 1
The device may only be installed in suitable flush-mounted sockets (DIN 49073-1) or a suitable surface-mounted
housing.
Pos: 34 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Montage/Waechter/Montage - 6812 U-101 @ 19\mod_1309767988690_15.docx @ 107625 @ 3 @ 1
6.2.1
Mounting height/applic ations
To guarantee an optimum function of the flush-mounted sensors, observe the following table.
F lus h-mounted s ens or type
Mounting height, applic ation
B uilt-in pos ition of the
c onnec ting s c rews
6813-xxx-10 …
6813/11-xxx …
2.0 – 8.0 m (ceiling mounting)
—
6810-21X-101 …
0.8 – 1.2 m (stairwell)
Top
6800-xxx-104(M) …
0.8 – 1.2 m (stairwell)
Bottom
2.0 – 2.5 m (room monitoring)
Bottom
Fig. 3: Mounting height of stairwell
6810-21X-101 …
6800-xxx-104(M) …
Fig. 4: Mounting height of room monitoring
6800-xxx-104(M) …
In combination with the presence detector 6813 …, only ceiling mounting makes sense. If possible, the presence
detector 6813 … should be installed directly above the workplace.