ABB AWIN GW100, User Manual

Page: 54 / 68

LED IND IC ATOR S TROU BLES HOOTING
50 3BNP1029 12 C
8 Troubleshooting
8.1 LED Indicators
Figure 32 defines the LED indicator meanings for the AWIN GW100 WirelessHART gateway.
Figure 32: AWIN GW100 LED locations
Table 14: Color code
No. LED name LED color LED status Description
1 ST Green
ON Power/device active
Flashing Device initializing
2 Mesh Green
ON WirelessHART devices connected
OFF No WirelessHART devices
3 Link Green
ON LAN connected
OFF LAN not connected
4 Data Yellow Flashing Indicates incoming/outgoing data on
LAN port
5 Err Red
ON Internal error
OFF No errors
8.2 General Troubleshooting
When troubleshooting a WirelessHART network, the first step is to check the power and an-
tenna connection. Once that has been established, check that the gateway is powered on by
looking at ST LED.
Refer Table 15 to identify various problems and possible solutions.