ABB AV410, User Manual

Page: 6 / 64

4
…2 OPERATION
Fig. 2.3A Overall Programming Chart
VIEW SETPOINTS VIEW OUTPUTS VIEW HARDWARE VIEW SOFTWARE
A1: Setpoint Analog Output 1 Sensor Type A AV400/2000 Issue
A2: Setpoint Analog Output 2 Sensor Type B
A3: Setpoint Digital Comms.
Use the Sidescroll Key to scroll through the Pages within each Menu
To CONFIG. OUTPUTS
(see Fig. 2.3B)
Use the Downscroll
Key to scroll through
the Parameters
within each Page
OPERATING PAGE
Section 2.3, Page 6 Section 3.1, Page 8 Section 3.2, Page 9 Section 3.3, Page 9 Section 3.4, Page 10 Section 3.5, Page 10 Section 3.6, Page 11
Alarms
Errors
Power
Cals
VIEW LOGBOOK VIEW CLOCK
Date 01:03:04
Time 12:00
SENSOR CAL
Section 4.2, Page 14
SECURITY CODE
Section 5.1, Page 16
CONFIG.SENSOR
Section 5.3, Page 18
Use the Menu Key
to scroll through
the Menus
Set Backlight
LED Backlight
CAL. USER CODE Calib. Sensor A
A:Fill Zero Sol.
A:#####085%#####
A:Fill Span Sol.
A:#####085%#####
A:Cal. Complete
Calib. Sensor B
B:Fill Zero Sol.
B:#####085%#####
B:Fill Span Sol.
B:#####085%#####
B:Cal. Complete
Set Language
English
CONFIG. DISPLAY
Section 5.2, Page 17
Config. Sensor A
A:Displayed Unit
A:Filter Time
A:Conv. Factor
A:Flow Alarm
A: Infer. Units
A:Clean Interval
B:Displayed Unit
B:Filter Time
B: Infer. Units
B:Conv. Factor
B:Flow Alarm
Config. Sensor B
B:Clean Interval
Config. Alarm 1
A1: Assign
A1: Type
A1: Failsafe
A1: Action
A1: Setpoint
A1: Hysteresis
A1: Delay
Config. Alarm 2
A2: Assign
A2: Type
A2: Failsafe
A2: Action
A2: Setpoint
A2: Hysteresis
A2: Delay
A3: Type
A3: Failsafe
A3: Action
A3: Setpoint
A3: Hysteresis
A3: Delay
Config. Alarm 3
A3: Assign
Section 5.4, Page 20
CONFIG.ALARMS
A: User Defined B: User Defined
Displayed only if digital communications option board fitted and PROFIBUS-DP
digital communications feature enabled – see Section 7.1
Key
Dual input analyzer only