43
7
CALIBRATION
Fig. 7.1 Overall Factory Settings Chart
Note.
An AV400 System is supplied factory-configured as a matched system with each component bearing the same serial
number. If any part of a system is replaced (transmitter or sensor[s]),
a complete factory re-calibration must be carried out
.
7.1
Factory Settings
FACTORY SETTINGS
Factory Set Code
Set Up Sensor A
A: Lo Organics
A:Ref. Factor
Set Up Sensor B
B: Lo Organics
B:Ref. Factor
To
OPERATING PAGE
Dual input analyzers only
Key
Cal. Output 1
Cal. Output 2
O1: Adjust 4mA
O2: Adjust 4mA
O1: Adjust 20mA
O2: Adjust 20mA
Use the Sidescroll Key to scroll through the Pages within each Menu
Use the Menu
Key to scroll
through
the Menus
Use the Downscroll
Key to scroll through
the Parameters
within each Page
Section 7.1, Page 42
Alter Fact. Code
Factory Cal. A
A:Fill Zero Sol.
A:
100%
A: Fill Sol. 1
A:
100%
A: Fill Sol. 2
A:
100%
A: Fill Sol. 3
A:
100%
A:Cal. Complete
Factory Cal. B
B:Fill Zero Sol.
B:
100%
B: Fill Sol. 1
B:
100%
B: Fill Sol. 2
B:
100%
B: Fill Sol. 3
B:
100%
B:Cal. Complete
Digital Comms.
Note.
The
Digital Comms.
frame is displayed only
if the digital communications option board is fitted.
A:Ref. Low Limit
B:Ref. Low Limit
