Manual for High Voltage Process Performance Motors
6 - Transport and Unpacking
3BFP 000 063 R0101 REV D
Chapter 2 Transport and Unpacking
2.1 Protective measures prior to transport
2.1.1 General
The following protective measures are taken before delivery of the machine from the factory.
The same protective measures should be taken, whenever the machine is moved:
•
Some machines, and all machines with sleeve or roller bearings, have transport locking
devices installed
•
Ball and roller bearings are greased with lubricant indicated on the bearing plate, which is
attached to the machine frame, see Chapter 2.1.2 Bearing plate
•
Machined metal surfaces, such as the shaft extension, are protected against corrosion with
an anti-corrosive coating
•
In order to protect the machine properly against water, salt spray, moisture, rust and
vibration damages during loading, sea transport and unloading of the machine, the
machine should be delivered in a seaworthy package.
Figure 2-1 Bearing plate for grease lubricated rolling bearings
1.
Bearing type of D-end
2.
Bearing type of ND-end
3.
Lubrication interval
4.
Quantity of grease for D-end bearing
5.
Quantity of grease for ND-end bearing
6.
Additional information
7.
Type of grease delivered from factory
