286 Parameters
Speed
The scaling is defined by parameter
.
4
Frequency
The scaling is defined by parameter
5
Selects the type and scaling of reference 2 received from
fieldbus adapter A. The scaling of the reference is defined
by parameters
46.01
…
46.03
, depending on which
reference type is selected by this parameter.
For the selections, see parameter
.
Selects the type/source and scaling of actual value 1
transmitted to the fieldbus network through fieldbus
adapter A.
Speed or frequency
Type/source and scaling are chosen automatically
according to the currently active operation mode as
follows:
0
Transparent
The value selected by parameter
is sent as actual value 1. No scaling is
applied (the 16-bit scaling is 1 = 1 unit).
1
General
The value selected by parameter
is sent as actual value 1 with a 16-bit
scaling of 100 = 1 unit (ie. integer and two decimals).
2
Torque
is sent as actual value 1.
3
Speed
is sent as actual value 1. The
scaling is defined by parameter
.
4
Frequency
is sent as actual value 1. The
scaling is defined by parameter
.
5
Position
Motor position is sent as actual value 1. See parameter
.
6
Selects the type/source and scaling of actual value 2
transmitted to the fieldbus network through fieldbus
adapter A.
For the selections, see parameter
Selects the source of the fieldbus status word when the
fieldbus adapter is set to a transparent communication
profile eg. by its configuration parameters (group
Not selected
No source selected.
-
Source selection (see
on
page
-
No.
Name/Value
Description
Def/
FbEq16
Operation mode
(see par.
Actual 1 type
(source)
Scaling
Speed control
(
Torque control
Frequency control
Summary of Contents for ACS880 ESP
