272 Parameters
-
Preselects the data to be sent as word 2 of data set 2 to the
external controller.
See also parameter
.
For the selections, see parameter
See parameter
.
…
…
…
…
See parameter
.
…
preselect data to be sent in data
sets 11, 13, 15, 17, 19, 21, 23 and 25 to the external
controller.
Parameters
display the data to be sent to the
external controller. If no data has been preselected, the value
to be sent can be written directly into these parameters.
For example, this parameter preselects the data for word 1 of
data set 11. Parameter
displays the selected data in integer format. If no data is
preselected, the value to be sent can be written directly into
parameter
None
None.
0
CW 16bit
Control Word (16 bits)
1
SW 16bit
Status Word (16 bits)
4
Act1 16bit
Actual value ACT1 (16 bits)
5
Act2 16bit
Actual value ACT2 (16 bits)
6
-
Preselects the data to be sent as word 2 of data set 11 to the
external controller.
See also parameter
For the selections, see parameter
Preselects the data to be sent as word 3 of data set 11 to the
external controller.
See also parameter
For the selections, see parameter
See parameter
.
…
…
…
…
See parameter
.
Displays (in integer format) the data to be sent to the external
controller as word 1 of data set 2.
If no data has been preselected by
, the value to be sent can be written directly into this
parameter.
0
0…65535
Data to be sent as word 1 of data set 2.
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS860
