ABB ACS580MV, Quick Manual

Page: 33 / 44

Operation 33
1. Enable the local control mode of the control panel by pressing the Loc/Rem key (1).
The drive is in state Stopped and the display shows .
2. Enter the setpoint. See “ ACS-AP-X assistant control panels user’s manual ”
3. Press the Start key (2) to start the motor.
After the motor has been magnetized, the motor speed ramps up to the setpoint.
While the motor is accelerating, the run status indication on the display blinks. When
the motor speed has reached the setpoint, the run status indication lights up
permanently.
Stopping the drive
This section describes how to stop the drive using the local operator panel of the drive. If
the drive is remotely-controlled, follow the established shutdown procedures.
For details on using the local control panel see “ ACS-AP-X assistant control panels user’s
manual ”.
2
1