ACS580-0P 3R Irrigation Packaged Drive
7
Installation
Installation Flow Chart
The installation of Input Disconnect configurations for ACS580 drives follows the outline
below. The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
Note!
References in the middle column below are to the ACS580-01 User’s Manual.
References in the third column below are to this manual.
Task
Refer to the
ACS580-01 User’s
Manual “Installation”
section
Additional Reference in
this Manual
PREPARE
for
installation
“Preparing for Installation”
•
“Drive Identification” on page 9.
•
“Suitable Mounting Location” on
page 10.
PREPARE
the
Mounting Location
“Prepare the Mounting Location”
• “Dimensions and Weights”
MOUNT
the drive
“Mount the Drive”
--
INSTALL
wiring
“Wiring Overview” and
“Install the Wiring”
“Installing the Wiring”
CHECK
installation
“Check Installation”
--
APPLY
power
“Apply Power”
--
START-UP
“Start-Up”
--
