CONTROL SYSTEM
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
4.3.1.4. I/O device identification
The I/O modules are identified on the part with an identification label (1 in
Fig. 4
9), in the wiring diagram, and in the software by the wiring diagram
identification number (2 in Fig. 4
9).
Figure 4
-
9 IOEC module identification
The way the identification number is built directly corresponds to the wiring
diagram as can be seen in Fig. 4
9. The letter A represents the kind of part we have,
an assembly, the next three digits are the page number the part is located on, page
191, and the last digit, 1, means that our part is the first assembly on the page. This
identification label number is the key to track electrical devices throughout the
drive and in the ABB documentation.
The designation for each IOEC module is shown in Table 4
1) Identification label
2) Identification number
Table 4
-
6 IOEC module identification
I/O module type
Wiring diagram designation for module identification
IOEC1
A5191
IOEC2
A5201
IOEC3
A5211
IOEC4
A5221
A5191
A5191
1
2
