ABB ACS-AP-x User Manual Download

Page: 25 / 66

Basic operation 25

Common user tasks

The following tables list common user tasks and describes how to complete the task.
See chapters

Functions in the main Menu

(page

) and

Functions in the Options

menu

(page

) for detailed descriptions of functions in the menus.

Note:

The Menu options varies based on the drive/device to which the control panel

is connected.



Basic operation of the drive



Parameters

Task

Actions

Start and stop the drive.

In local control, press

to start the drive and

to stop the drive.

Set the reference (for example, speed) in
the

Home

view.

In local control, go to

Options > Reference

. Set

the reference with the arrow keys. For detailed
instructions, see

Setting the reference

(page

Switch between local and remote control.

Press

Change the direction of motor rotation.

In local control, go to

Home

view, press

(

Options

) to open the

Options

menu and select

Direction change

Task

Actions

Choose parameters displayed on the
Favorites list.

Go to

Menu > Parameters > Favorites > Edit

Summary of Contents for ACS-AP-x


































































Search results

Summary of Contents for ACS-AP-x

Reviews:

Related manuals for ACS-AP-x

Brands by name

Popular brands

ABB ACS-AP-x, User Manual

Search results

Summary of Contents for ACS-AP-x

Reviews:

Related manuals for ACS-AP-x

Brands by name

Popular brands