Panel-to-PC USB connection 57
10
Panel-to-PC USB connection
What this chapter contains
This chapter describes the USB connection between the Assistant control panel and
a PC.
USB connection
The three main functions of the USB connection are:
•
The control panel acts as an USB adapter, allowing the PC tool to interact with the
drive. See
Connecting a PC tool to a drive through the control panel
(page
).
•
It is possible to transfer data (for example, screenshots and backups) between the
control panel and the PC. When connected, the control panel appears as an MTP
device on the PC.
•
USB port is intended for temporary service use.
Summary of Contents for ACS-AP-x
