background image

24   Basic operation

Common user tasks

This following tables list common user tasks and describes how to complete them. 
See 

Functions in the main Menu

 an

Functions in the Options menu

 for detailed 

descriptions of functions in the menus.

Basic operation of the drive

Parameters

System information and help

Task

Actions

Start and stop the drive.

In local control, press 

 to start the drive and 

 to stop the drive.

Set the reference (for example, speed) in 
the 

Home

 view.

In local control, go to 

Options > Reference

. Set 

the reference with the arrow keys. For detailed 
instructions, see 

Setting the reference

 on page 

38

.

Switch between local and remote control. Press 

.

Change the direction of motor rotation.

In local control, go to the 

Home

 view, press 

 

(

Options

) to open the 

Options

 menu and select 

Direction change

.

Task

Actions

Choose parameters displayed on the 
Favorites list.

Go to 

Menu > Parameters > Favorites > Edit

See also 

Editing the list of favorites

 on page 

28

.

View/edit parameters.

Go to 

Menu > Parameters

 to view parameters.

See 

Editing parameters

 on page 

29

 fo

instructions on editing parameters.

Add parameters to the Home view.

See 

Editing the contents of the Home view

 on 

page 

38

.

Show/hide parameter index and group 
numbers.

Press  

+ .

Restore parameter default value.

In the editing mode, press 

 + 

To save the default value, press 

 

(

Save

).

View parameters that differ from 
Application Macro defaults.

Go to 

Menu > Parameters > Modified

.

Task

Actions

How to get help.

Press 

 to open the context-sensitive help.

View control panel version.

Go to 

Menu > System info > Control panel

.

View drive information.

Go to 

Menu > System info > Drive

.

Loc/Rem

?

Assistant Panel Guide Rev B.book  Page 24  Tuesday, April 10, 2012  12:08 PM

Summary of Contents for ACS-AP Series





























































Reviews: